Due to the high temperature gaseous substance condensed into the process of temperature decrease of a non-gaseous state condensation process, high-temperature water vapor condenses into liquid water in the process of the process condensate. Born in heating steam condensate Fisheries and during transportation, so it is not only good water quality and contains a lot of heat, so many companies have to be treated for the condensate.

 

Insulation Condensate equipment or piping is to prevent condensation and reduce the appearance of cold, heat loss. Of course, to prevent condensation is to require most of the time without condensation. Condensation is due to the material surface temperature is below the dew point temperature of the air near the air caused by the condensation of water vapor on the surface of the phenomenon. It refers to the so-called dew point temperature and pressure conditions under certain humidity, the atmospheric temperature decreases, the temperature of atmospheric water vapor when condensed. That is, under conditions of constant water vapor partial pressure is not saturated wet air is cooled to a temperature of saturated moist air time. Therefore, the choice of insulation thickness should be taken to prevent the minimum thickness and the thickness of both the outer surface of the economy of the greater of condensation.

Insulation materials for use in the condensate line equipment, has been widely used in papermaking, chemical, food, pharmaceutical, grain and oil processing, rubber, cotton, printing, wood and other sectors of industrial enterprises have steam heating system condensate closed Recycling can be used for hotels, hospitals and civil steam water recycling, conventional traditional open-condensate recovery tank replacements.

British cable insulation material inside Roxy closed cell structure, surface crust to form a protective layer, the interior and the outside air, generally do not need to add a gas barrier layer.

Best density: 50 ± 5% kg / m3

Thermal conductivity: 0 ℃ when 0.034 W / (m · k)

Combustion performance: B1 or B2 level grade

Temperature: -50 ~ 105 ℃

(1) The system connecting pipes, such as frozen water pipes, condensate pipes and direct media pipelines.
(2) The system of ventilation ducts, such as back to the pipelines.
(3) parts of the media unit piping and reservoir, indoor terminal equipment.